Currency RUB
The combined road car. Model: KO-829B1 buy in Arzamas
Buy The combined road car. Model: KO-829B1
The combined road car. Model: KO-829B1

The combined road car. Model: KO-829B1

Products from producer
In stock
110 RUB
  • 100 RUB/pcs  - from 2 pcs
  • Cash,
  • Invoice payment,
  • Visa/Mastercard,
  • Cash on delivery
  • In detail
Russia, Arzamas
(View map)

Company rating

87% of positive reviews from 38
Technical characteristics
  • BrandКОММАШ (Арзамас)
  • Country of manufactureRussia

The combined road KO-829B1 car is intended for year-round service of city and main roads with an asphalt and concrete covering at an air temperature from minus 20 s to plus 40 s.

  • During the summer period the car is used for a sink, watering, cleaning of dirt and dust of pavings, and also for a sink of sidewalks and watering of green plantings and lawns.
  • During the winter period the car is used for high-speed and patrol cleaning of a roadbed of the new-fallen or pressed snow, removal of frost and topping by deicing materials.

Technical characteristics:  

Basic chassis KAMAZ-65115
Fuel type diesel
Full weight, kg 22400
Overall dimensions (DKHSHKHV), mm 11900*х4225*х3600 *
* the maximum indicators are specified
Capacity, m3
- NNM tanks 12
- plastic tanks 10
- tanks of system of moistening 1,56
- PGM distributor bodies 8
Width of a working zone, m
- PGM distributor 2-10
- low pressure sink 2,5 - 20
- high-pressure sink horizon. 2,8 - 3,5, vert. 0,8
- laths for distribution of ZhPGM 3-12
Density of distribution of PGM, g/m2
- peskosol 50 - 500
- pure salt with moistening 5-50
- liquid reagents 5-80
Compatibility with additional options
- the dump is forward rotary +
- the dump is forward rotary hydraulic +
- dump high-speed +
- dump side +
- the dump is grader +
- the brush is frontal +
- the brush is interbasic +
- the brush is back -
- a brush for a sink of barrier protections +
- the gun is raspylitelny +

Additional information:

  • The body of the European section, the increased rigidity, geometry of a body excludes lag of PSS on body walls.
  • Design of the scattering device easily folding, allowing to make replacement of any element with use only of a hand tool.
  • Arrangement of a spare wheel behind a cabin.
  • Maslobak with a compartment under hydroelements is transferred for a chassis cabin, the cover of the hydroblock is made of aluminum.
  • On all length of a body brushes for cleaning of chains and scrapers and the protective pallets preventing PSS prosypaniye on chassis units are established.
  • Possibility of installation of one of three types of chains with the increased explosive effort: anchor calibrated, vtulochno-roller, lamellar.
  • Two options of a brush interbasic on execution of the drive: one SY-250 hydraulic motor, two MGP-125 hydraulic motors. Control of turns of a brush is carried out by means of PP12-01 expense regulator.
  • The cone-shaped form of a disk of a spreader and Z-shaped guides of a shovel provide uniform distribution of PSS on width. Hydraulic motor of the drive of a disk of import production (Bulgaria).
  • The conveyor drive – a reducer with the hydraulic motor of import production.
  • Management of operation of the hinged equipment from the driver's cabin.
  • Ladder for visual survey.
  • Regulation of the scattering disk on height.
  • The lattice for trim of the PSS large fractions is executed from metal. strips it is also equipped with the technological hatch for access to mechanisms.
  • The notification of the driver about emergency leak of hydroliquid from system by means of the visual alarm system in the driver's cabin.
  • The drain highway of the increased section excluding temperature increase of hydroliquid to critical values.
  • System of regulation of width and asymmetry of distribution of PSS.
  • The bearing knot of a tension shaft is taken out from zone PSS.
  • Additional flashing beacon in a zone of the scattering device.
  • Material of a mobile tray and the mine of supply of sand – stainless steel.

Terms of delivery:

  • Minimum scope of supply: (from 1 piece)
  • Terms of delivery: (FCA, CPT, CIP)

Terms of payment:

  • bank transfer,
  • advance payment of 100%,
  • advance payment for statement in the plan of production of 50%. The rest of 50% before shipment.

The company makes:

  • Garbage trucks with back loading,
  • Garbage trucks with side loading,
  • Container garbage truck,
  • The combined road cars,
  • Vacuum cars,
  • Ilososny cars,
  • Cars for washing of channels,
  • The combined cars.
Contact the seller
The combined road car. Model: KO-829B1
The combined road car. Model: KO-829B1
Shipping method
Payment method
ClearSelected items: 0