The drilling rig mounted by truck, ZJ20/1580CZ
- Country of manufactureChina
- Way of transportationSelf-propelled
The drilling rig mounted by truck is suitable ZJ20/1580CZ for work in wells less than 2000 m in depth, it serves for difficult repair operations in wells, and also for oil and gas production. This model differs in ease and mobility, it is development of our company. This car differs in reliability and durability.
1. The hydraulic drilling rig is the main model of our company which is suitable for drilling and conducting repair operations.
2. CAT/Cummins the diesel engine can be used.
3. this mobile drilling rig is equipped with hydraulic transmission of ALLISON, also we can offer transmissions of local producers.
4. The chassis of the truck 10×8 is suitable for the two-winch drilling rig. And the chassis 8х8 is suitable for the drilling rig with one winch.
5. The main brake can be belt or disk, the additional brake can be a pneumatic brake with water cooling from Eaton.
6. Our company uses the numerous patented technologies that ensures practical design, reliable functioning, high efficiency, low expenditure for transportation and operation, simplicity of leaving and installation on the boring platform.
Technical Parameters of the Hydraulic Drilling rig Mounted By Truck
|1||Drilling depth (41/2burovaya bar) m||2000|
|2||General depth (31/2burovaya bar) m||5500|
|3||Max. loading of a hook of kN||1580|
|4||Speed of a hook (m/s)||0.2 to 1.4|
|5||Height of an arrow (m)||35|
|7||Engine capacity (kW)||470|
|9||Transmission type||hydraulics + mechanics|
|10||system of movement||5 × 4|
|11||Diameter of the main rope (mm)||φ29|
|12||Hook block model||YG160|
|14||Model of a rotor table||ZP175|
|15||Chassis model||XDP60/12 × 8|
|16||Angle of approach and removal||26 °/18 °|
|17||Mines clearance (mm)||311|
|19||Mines diameter of a turn||38|
|20||Sizes (m)||20.5 × 3.05 × 4.4|