The drilling rig mounted by ZJ15 truck
- Country of manufactureChina
- Way of transportationSelf-propelled
Serves for drilling and repair of wells less than 1500 m in depth, it is suitable for work with wells for oil production and gas production, and also water investigation. Thanks to the numerous patented technologies, our equipment differs in reliability, practical design, low expenditure for transportation, simplicity of installation on the place of drilling and leaving.
1. The hydraulic drilling rig is the main model of our company which is suitable for drilling and conducting repair operations.
2. CAT/Cummins the diesel engine can be used.
3. this mobile drilling rig is equipped with hydraulic transmission of ALLISON, also we can offer transmissions of local producers.
4. The chassis of the truck 10×8 is suitable for the two-winch drilling rig. And the chassis 8х8 is suitable for the drilling rig with one winch.
5. The main brake can be belt or disk, the additional brake can be a pneumatic brake with water cooling from Eaton.
Technical Parameters of the Drilling Rig mounted By Truck
|1||Drilling depth (41/2burova bar) m||1500|
|2||General depth (31/2burovaya bar) m||4500|
|3||Max. Loading of a hook of KN.||1350|
|4||Speed of a hook (m/s)||0.2 - 1.4|
|5||Height of an arrow (m)||33|
|7||Engine capacity (kW)||403|
|9||Transmission type||Hydraulics and mechanics|
|10||system of movement||5 × 4|
|11||Diameter of the main rope (mm)||φ26|
|14||Model of a rotor table||ZP175|
|15||Chassis model||XDP50/10 × 8|
|16||Angle of approach and removal||30 °/20 °|
|17||Mines clearance (mm)||311|
|19||Mines diameter of a turn (m)||30|
|20||Sizes (m)||18.8 × 3.05 × 4.3|
|21||Mass of the main unit (kg)||58000|