The Formatno-raskroyechny machine for cutting of the FRS-3000 panels
- Customer pickup,
- In detail
- Country of manufactureRussia
Formatno — the raskroyechny FRS-3000 machine as much as possible optimizes work on production of domokomplekt for low-rise construction. The sliding table of the strengthened design provides the smooth course and guarantees high reliability of the machine.
The main directing beam has welded design; it gathers on special building berth then passes tests for torsion and bend. The pressing beam on table has the pneumatic drive with the lower arrangement of cylinders that allows to hold strongly the panel most close to saw disk.
The machine allows to make cutting of panels at an angle from 0 to 450. The drive of the movement of the carriage is carried out the motor reducer of the Italian producer. Speed of the movement of the carriage is controlled by means of the frequency converter.
|The plate sizes for cutting on the machine, mm||3000×3000|
|The maximum kerf depth for the mm disk Ø800||360|
|Kerf depth for the mm disk Ø800 at 450||225|
|Diameter of saw, mm||800|
|Width of cut, mm||8|
|Angle of taper of saw node, degrees||0-450|
|Speed of the machine cut of saw, m/min||0-25|
|Power of the electric motor of circular saw, kW||11.2|
|Overall dimensions of the machine, Д×Ш×В, mm||6400×3500×2500|
|Mass of the machine, kg||1400|
|Material of bed, carriage, guides||Steel|
|Cost, rub.||395 000