- BrandZZBO
- Country of manufactureRussia
- TypeGas
The gas TGV - 250 heatgenerator in a module container
| Fan heater |
| TGV - 250 heatgenerator. The heat exchanger and the combustion chamber from stainless steel |
| Gas torch Baltur TBG 35 P (Italy) (optionally diesel) |
| Gas stage Baltur MM.407 B01 S20 TBG (Italy) |
| Nozzle 3,50 GPH - 60 ° - 2 pieces |
| Fan of BP 6 - 13M - 8 (Russia). Power is 22 kW |
| Multistage security system |
| The control panel is automatic |
| Power case of management |
| Module container with a door and an observation port |
| Passport of TGV - 250 |
The gas TGV - 250 heatgenerator is used to work of the RBU concrete plant in winter time. It is based on the principle to supply of hot air. It is intended for warming up of inert materials in process receiving concrete at air temperatures to minus 30C.
The heatgenerator gives heated air with a temperature not less than 150C under a high pressure to the air ducts connected to bunkers. Thermal power of installation of 250 kW ensures functioning of concrete plant with a productivity up to 60 m. kub. / h.
Installation uses indirect heating at which heat from combustion gases is transmitted to air through a wall of a fire chamber and a pipe of the heat exchanger. I. e. products of burning do not get in inert and respectively in plant. The heatgenerator consists of a gas torch Baltur TBG 35 P (Italy) (optionally the heatgenerator is equipped with a diesel torch), the fan of a high pressure, a fire chamber, the heat exchanger, a control panel and automatic equipment. The heat exchanger and the combustion chamber are manufactured of stainless steel.
Installation is delivered as separately on a frame for installation to the room, and in the separate block box. Air ducts for connection of the heatgenerator to the dosing complex are optionally delivered.
The heatgenerator is used in the electrified zones (work in the autonomous mode is optionally possible).
Features of installation- Instant start — - minute before work
- Quickly heats and dries inert
- Low consumption of gas fuel
- Type of fuel gas (optionally diesel)
- The heat exchanger and fire chamber from stainless steel
- Is not subject to registration In Rostekhnadzor
- The automatic mode, high efficiency — - 90%
- Thermal power, kvt250
- Air consumption at the exit, m3 час4500
- Pressure of the fan, Pa12000
- Air temperature at the exit not less, C°150
- Time of an exit to an operating mode, sek120
- Look toplivagaz (optionally diesel)
- Fuel consumption, m3 þáß8 - 40
- EFFICIENCY, % 90
- Rated capacity, kvt23
- Operation temperature, With ° - 35. . . 40
- Weight no more, kg4000
- Height, mm2700
- Width, mm2050
- Length, mm4655
