- Country of manufactureRussia
- Availability of CNCNo
- Type of machineSlab-processing
The machine the gorbylno - overworking GP - 500 - 3 with 3 clamping rollers, sliding forward saws, the 4th saw
The machine the gorbylno - overworking GP - 500 - 3 is intended for processing gorbylya in a cut board, works in the automatic mode without involvement of additional personnel.
The machine is used to processing gorbylya and receiving from it a cut board. Trimming of edges and horizontal division gorbylya is made in the automatic mode for one pass without the need for involvement of additional service personnel.
There is a possibility of installation of two saw disks on a spindle which dismisses the croaker on boards in horizontal position, at the same time efficiency and speed of processing gorbylya increases.
The four - saw machine has the following advantages:
- the universal design with three driving rollers guarantees reliable giving gorbylya via the machine;
- the clip gorbylya is carried out by any improvised freight and reliably holds the croaker in a zone of cutting of edges;
- at the exit from the machine the cut board having four processed parties turns out;
- the received board differs in high quality of a cut and accuracy of given sizes.
|Sort of current of a power line||variable|
|Frequency of current, Hz||50|
|The used tension, In||380|
|The sizes of the processed material
2 - 4
|The board is cut||80x16 (20/25/, 32/, 40); 105X16 (25, 32, 40); 50 - 150|
|Number of electric motors||2 pieces - 7. 5 kW; 1 pieces - 1, 1 kW; 1 pieces - 15 kW|
|Diameter of a shaft of the machine, mm||50 - 60|
|Quantity of saws, piece no more||3|
|Diameter of saws, mm
450 - 2 pieces.
500 - 2 pieces.
|Speed of giving, m/min||6|
|The reducer is worm||NRW - 0. 75 \ 60|
|Frequency of rotation of saw disks, rpm||3000|
|Overall dimensions of the three - saw machine