- Special featureSelf-leveling
Preparation of a surface
The surface under filling has to be cleared of dust, paint coats and other substances weakening adhesive properties of material. To remove the exfoliating and friable elements. Before filling the basis to process a primer of "Sind-plus" or "Sind-lyuks". Readiness of the basis can be checked as follows: to pour a little water on the grounded basis. If water is quickly absorbed, it is necessary to process repeatedly a primer before formation of a waterproof film. Primers reduce the absorbing ability of the basis for an exception of risk of formation of cracks in the course of curing.
In a tank with clear, cold water to fill up mix in the ratio 0,45-0,5/1 (13-15 l. on a bag of 30 kg) and to mix by means of the construction mixer on small turns before receiving uniform (without lumps and peeling of water) masses with viscosity at which the volume of solution 200 of ml spreads on a plain surface a spot diameter the 290-300th, or to adjust for work with mix according to the maintenance instruction the solution-mixing pump.