Currency RUB
TITAN 500 buy in Rostov-na-donu
Buy TITAN 500


Products from producer
In stock
Reconfirm the price with seller
Russia, Rostov-na-donu
(View map)
Technical characteristics
  • BrandРОСТЗИП
  • Country of manufactureRussia


  1. Adjustable temperature, saturated vapor: 105 - 165 ° C
  2. Module uses two inductive capacity of 250 kg / steam / hour, the total steam output: 500 kg / steam / hour
  3. Installed power consumption: 175 kW
  4. Adjustable operating pressure steam, 0 - 100% : 7 bar
  5. Supply Voltage:  380V
  6. Current type: AC three - phase
  7. Current frequency: 50 Hz
  8. Three - phase switch: Contactless
  9. It does not require the approval of the supervisory authorities.
  10. To operate the steam generator water treatment required.
  11. Dimensions VhDhSh: 1370h1600h900 mm
  12. Mass: 750 kg

The principle of operation of the steam generator:

Feed water which has passed water treatment of the filler (condensate) of the tank is forced to the secondary winding of the inductor, a high - pressure plunger pump, where it proceeds almost instantaneously in steam state. The greater number of inducers, the higher the performance of the steam generator, the steam consumption is directly proportional to productivity. steam generator control of all workflows and Protection, made a touch panel controller "OWEN" (SEC).

The steam generator has nine degrees of protection:

  • vapor pressure, exceeds the limit
  • by the absence of the feedwater in the steam generator system
  • by feedwater temperature, if the temperature has exceeded the allowable limit
  • the temperature of the primary winding of the transformer if the temperature exceeds the allowable limit
  • superheat secondary inductor winding, when the temperature has exceeded the allowable limit 
  • at occurrence of scum in the secondary winding of the inductor
  • temperature of the power unit when the temperature has exceeded the allowable limit
  • the level of humidity inside the steam generator, if the humidity exceeds the allowable limit (for models in which the sensor is installed)
  • to disrupt communication between SPC and its module

Upon request, the steam generator have the capability of manufacturing special design, with the possibility of controlled operating pressure to 12 bar and steam temperature to 188 ° C.

The steam generator is equipped with spare parts: the pump washing station PS - 3000 and the secondary winding of the inductor.

Contact the seller
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Shipping method
ClearSelected items: 0