|Speed of drawing label||12-15 m/min.|
|To max. dia. roll of labels||300 mm|
|Internal to dia. roll of labels||76 mm|
|Electric characteristics||220/110 In, 50/60 Hz|
- Main characteristics
URANO 90 model? represents pneumatic system for the seal on labels and their subsequent drawing on products of the flat form. Production of the srl E-Packaging company, Italy. Drawing the label is performed as follows: the label is placed on the prisasyvayushchy plate, then the lever with the pneumatic cylinder applies the label on front or back part of the product. By means of URANO 90? you can apply logos, alphanumeric data and barcodes on labels. The control panel allows to manage the cycle of marking and to regulate such parameters of work as suction duration, the cylinder delay, and also to receive signals of operation of the printer and the notification on malfunctions in pneumatic system. The URANO printer applicator is equipped with printers of such producers as CARL VALENTINE, ZEBRA, DATAMAX, SATO, INTERMEC and CAB.
- Drawing the label on front and back part of the product at an angle 90?.
- High resolution.
- Pneumatic SMC or FESTO system.
- Regulated speed of drawing label.
- The external rewinding device for the substrate.
- ON design of the label for Microsoft Windows.
- The manometer for control of pressure.
- Start of the cycle of the photo sensor.
- The microprocessor for regulation and management of the cycle of marking, duration of suction, the delay of the cylinder, receiving signals of operation of the printer and notifications on malfunctions in pneumatic system.
- Alarm lamp for indication of the termination of the tape in the roll.
- Standard ON.
- Special ON.
- Column for fastening with the basis.
- The sensor for regulation of the course of the cylinder according to the product size.